XCMG Rotary Drilling Rig XR180D
Konfigurasi rinci
Nganggo mesin turbocharging Cummins impor,
Standar CE .Sistem pelumas terpusat .
Kaluwihan
XCMG XR180D Rotary Drilling Rig digunakake digunakake ing boring operasi tumpukan beton bosen ing engineering pondasi dalan, railways, kreteg, bandar, docks lan bangunan dhuwur.
1. Hydraulic teleskop (seri TDP) trek chassis lan diameteripun gedhe saka slewing prewangan kang khusus kanggo rig pengeboran Rotary digunakake, lan ketemu stabilitas super kuwat lan penak transportasi.
2. Mesin turbocharged kontrol elektronik sing diimpor asli digunakake kanthi daya sing kuat, lan emisi memenuhi standar emisi Amerika Utara Tier 4 Final, Eropa stageⅣ.
3. Sistem hidrolik Jerman digunakake, lan kontrol aliran positif, kontrol sensing beban lan kontrol watesan daya digunakake kanggo nggawe sistem hidrolik luwih efisien energi.
4. Baris tunggal tali lan winch master digunakake kanggo ngatasi masalah nyandhang tali kawat baja kanthi efektif lan nambah umur layanan tali kawat baja kanthi efektif;lan winch master diwenehake karo detektor ambane pengeboran, lan baris siji tali ndadekake deteksi ambane luwih akurat.
5. Kabin anti-noise kanthi fungsi FOPS, kursi sing bisa diatur, AC, lampu interior lan njaba, wiper kaca ngarep kanthi fungsi semprotan banyu.Kontrol konsol kanthi macem-macem instrumen lan gagang, LCD warna kanthi fungsi sing kuat.
Paramèter
| Proyek | Unit | Parameter |
| Max.Drilling Dhiameter | ||
| Uncased | (mm) | φ1800 |
| Kasedhiya | (mm) | φ1500 |
| Max.Drilling ambane | (m) | 60 |
| ukuran | ||
| Kondisi kerja L × W × H | (mm) | 8350 × 4200 × 20480 |
| Kondisi transportasi L × W × H | (mm) | 14255×2960×3450 |
| Sakabèhé Bobot Drilling | (t) | 56 |
| mesin | ||
| Model | - | CUMMINS QSB6.7-C260 |
| Daya Rated | (kW) | 194/2200 |
| Sistem Hidrolik | ||
| Tekanan kerja | (MPa) | 35 |
| Penggerak Rotary | ||
| Maks.torsi output | (kN.m) | 180 |
| kacepetan Rotary | (r/min) | 7~27 |
| Spin off kacepetan | (r/min) | 102 |
| Pull-Mudhun Cylinder | ||
| Max.pull-mudhun piston push | (kN) | 160 |
| Max.pull-mudhun piston narik | (kN) | 180 |
| Max.pull-mudhun piston stroke | (mm) | 5000 |
| Wong Winch | ||
| Max.pull-mudhun piston push | (kN) | - |
| Max.pull-mudhun piston narik | (kN) | - |
| Maks.push-mudhun piston stroke | (mm) | - |
| Winch Utama | ||
| Max.kakuwatan narik | (kN) | 180 |
| Maks.kacepetan tali tunggal | (m/min) | 65 |
| Diameter tali kawat baja | (mm) | 28 |
| Winch Bantu | ||
| Maks.Daya tarik | (kN) | 50 |
| Maks.kacepetan tali tunggal | (m/min) | 70 |
| Diameter tali kawat baja | (mm) | 16 |
| Tiang pengeboran | ||
| Miring kiwa/tengen saka tiang | (°) | 42432 |
| Condhong ngarep saka mast | (°) | 5 |
| Sudut slewing meja Rotary | (°) | 360 |
| Lelungan | ||
| Maks.kacepetan lelungan | (km/jam) | 2.3 |
| kemampuan Max.grade | (%) | 35 |
| Crawler | ||
| Jembar sepatu trek | (mm) | 700 |
| Jarak antarane trek | (mm) | 2960~4200 |
| Dawane crawler | (mm) | 5140 |
| Tekanan tanah rata-rata | (kPa) | 93.6 |
